MACRO SENSORS传感器,MACRO SENSORS旋转位移传感器,MACRO SENSORS超声波传感器

美国MACRO SENSORS产品有弹簧式传感器,旋转位移传感器及超声波传感器等.

GHSA/GHSAR Series Spring Loaded AC LVDT These heavy duty AC operated units use sleeve bearings to provide good repeatability and extended service life in shop floor applications. Three different configurations are available: the GHSA, with an axial connector for close mounting; the GHSAR, with a radial connector for shorter installed length; and the GHSAR-A, an air extend/spring retract version with a radial connector. (more info)Available in standard 0.750" [19 mm] diameter Ranges of ±0.05" to ±2" [±1.25 mm to ±50 mm] Repeatability of 0.000025" [0.60 μm] or better In-line or through-bore design Mating plug for connector included Also available in air extend/spring retract versions (GHSAR-A) GHSD/GHSDR Series Spring Loaded DC LVDT The DC operated GHSD/GHSDR Series utilize built-in electronics that convert a ±15 V DC input into a precalibrated 0 to ±10V DC output. Like the AC version, it is available in seven standard ranges from ±0.020" [±0.51 mm] to ±2.00" [±50 mm] and three different mechanical configurations: GHSD (axial connector); GHSDR (radial connector); and GHSDR-A, (air extend/spring retract). (more info)Available in standard 0.750" [19 mm] diameter ±15 V DC input, precalibrated 0 to ±10 V DC output Precalibrated ranges of ±0.02" to ±2.00" [±0.51 mm to ±50 mm] Repeatability of 0.000025" [0.60 μm] or better Available in in-line, through-bore or air extend/spring retract versions (GHSDR-A) GHSE/GHSER Series Spring Loaded Single-Ended DC LVDT The GHSE/GHSER Series offer all the advantages of our other general purpose spring loaded LVDTs, but are powered by a nominal 24 V DC input and are available in six standard precalibrated ranges from 0.100" [2.5 mm] to 4.00" [100 mm] with an output from 0-10V DC. Axial (GHSE), radial (GHSER), and air extend/spring retract (GHSER-A) versions with sealed connectors are available. (more info)Available in standard 0.750" [19 mm] diameter 24 V DC input, precalibrated 0 to 10 V DC output Precalibrated ranges of 0.10" to 4.00" [2.5 mm to 100 mm] Repeatability of 0.000025" [0.60 μm] or better Available in in-line, through-bore or air extend/spring retract versions (GHSER-A) GHSI/GHSIR Series Spring Loaded Loop Powered LVDT GHSI/GHSIR Series LVDTs offer all the advantages of our other general purpose spring loaded LVDTs, along with the convenience and simplicity of precalibrated 4-20 mA current loop operation. Units operate as 2-wire loop powered or 3-wire sourcing externally powered. Axial (GHSI), radial (GHSIR), and air extend/spring retract (GHSIR-A) versions with sealed connectors are available. (more info)Available in standard 0.750" [19 mm] diameter 4 to 20 mA input/output Precalibrated ranges of 0.10" to 4.00" [2.5 mm to 100 mm] Repeatability of 0.0001" [2.50 μm] or better Available in in-line, through-bore or air extend/spring retract versions (GHSIR-A) GPA Series Spring Loaded AC LVDT Macro Sensors has successfully bridged the gap between price and performance in industrial gaging applications with the GPA 750 Series Spring-Loaded AC-LVDT! Incorporating customer suggestions, along with the most sought after features of the highly successful GHSA 750 Series, the GPA 750 has been designed and packaged to deliver a lower cost gaging alternative. (more info)Reduced cost Available in standard 0.750" [19 mm] diameter Ranges of ±0.05" to ±2" [±1.25 mm to ±50 mm] Integral 6 conductor, 3 foot shielded cable Non-linearity of less than ±0.25% Interchangeable chrome plated / hardened tool steel tip (#9 AGD) BBP/BBT Series Ultrahigh Precision Gaging Probes BBP and BBT Series AC LVDTs utilize linear ball bearings to provide exceptional repeatability and long service life. They are available in 0.315 inch [8 mm] diameter plain body and 0.375 inch [9.5 mm] diameter, plain or threaded body. Standard versions feature a probe shaft that is fully extended by spring force, while versions with a probe shaft extended by low pressure air and retracted by spring force are also available. (more info)Ranges of ±0.04" to ±0.20" [±1 mm to ±5 mm] Repeatability of 0.000006 inches [0.15 μm] or better Exceptionally long life - 200 million cycles Sealed to IEC IP-65 Also available in air extend/spring retract versions GSA Series Economically Priced Short Range LVDT The GSA Series of short range spring loaded position sensors were developed for cost sensitive applications requiring LVDT reliability and performance. (more info)